arc blade hedge trimmer In practical applications, not only need to pay attention to the specification of operation when in use, but also need to pay attention to reasonable maintenance when not in use. For example, some users are more casual when using arc blade hedge trimmer, resulting in bumps and bruises, which is likely to cause damage to the device, which will affect performance and lead to reduced life. While some users are not in use, the maintenance consciousness is relatively weak, and the arc blade hedge trimmer is directly stacked at will, and the wind, sun and rain will cause great damage to it. That is to say, the standardized use and maintenance of arc blade hedge trimmer are important, only two points are done, it will extend the service life of arc blade hedge trimmer, how to do it? Let's take a look.

Canonical operation of arc blade hedge trimmer

1, should understand the use of instructions before use, and carefully read. I am familiar with the basic structure and performance of arc blade hedge trimmer, master the switching steps, and adjust the blade clearance appropriately.

2, arc blade hedge trimmer matching lithium battery should pay attention to its remaining power, indicating that the power is too low, should stop the operation, timely charging.

3, stop, should wait for the blade to completely stop rotating in the follow-up work.

4, the use of arc blade hedge trimmer for pruning branches, according to the height of the person, the height of the green plant, the width of the green plant, arc blade hedge trimmer handle adjusted to a better position, and then pruning.

5. Pay attention to personal safety when operating the arc blade hedge trimmer. In the operation should pay special attention to the debris on the green plant, especially hard things, should be cleaned up in advance, so as not to damage the arc blade hedge trimmer.

Key points of maintenance

1, before use, during use and after use, all parts should be carefully inspected. If it is found that the machine is damaged or the fastener is loose or detached, it should be replaced or adjusted in time.

2. The blade should be lubricated with oil every 1-2 hours.

3. The large branches cut when pruning can not exceed 30 mm (depending on the actual model of the supporting lithium battery). When cutting to thick branches or foreign bodies, feel the arc blade hedge trimmer sound abnormal, large vibration, should quickly shut down the machine, remove foreign bodies.

4. After the arc blade hedge trimmer is disabled for a long time, the dust and debris on its surface should be cleaned.

arc blade hedge trimmer https://www.keylead.cn/Electrical-Hedge-Trimmer-Arc-Blade