Market Overview:

The aircraft heavy maintenance visits market size is estimated to witness USD 56.83 Billion by 2032 and CAGR of more than 6% during the forecast period from 2023 to 2032.

On the basis of type, the aircraft HMV market has been segmented into airframe HMV, engine HMV, and component HMV. Airframe maintenance is carried out at a lower unit cost. Low-cost maintenance is possible because of the increased usage of lightweight fibre materials and hybrid alloys in the new-generation aircraft. This provides better fatigue and erosion resistance than the materials that were used in the conventional aircraft. As a result, there is a lesser failure rate and lower wear and tear, which minimizes the requirement for the airframe maintenance.

Concurrently, the turboprop engines are expected to drop in fleet size and market share. It is expected that, there will be a decrease in the number of turboprop-powered aircraft, during the forecast period. Therefore, the aircraft heavy maintenance visits market insight for turboprop-powered aircraft will witness a slower as compared to the other aircraft.

In the engine HMV segment, advancements in engine technologies have led to the development of more fuel-efficient engines, which can operate at greater temperatures and high stresses. Such engines require highly skilled maintenance service providers to carry out maintenance on the advanced and complex engines parts. The complexity of the maintenance increases the cost associated with it. Engine maintenance visits are performed on a scheduled basis, which includes repair, maintenance, inspection, and preventive maintenance to restore the performance of the engine. Engine maintenance is often divided into floor visit overhaul work and Life-Limited Parts (LLP) maintenance work. In these maintenance visits, the engine is detached from the aircraft for a period and after maintenance, the engine is assembled to the aircraft, which results in high maintenance costs. Due to these reasons, the engine HMV market segment will contribute the largest share and will have a moderate rate of growth, during the forecast period.

Market Segmentation:

This study provides an overview of the global aircraft heavy maintenance visits market size, tracking three market segments across five geographic regions. The report studies key players, providing a five-year annual trend analysis that highlights market size, volume, and share for North America, Europe, Asia Pacific (APAC), Middle East and Africa, Latin America. The report also provides a forecast, focusing on the market opportunities for the next five years for each region. The scope of the study segments the global aircraft heavy maintenance visits market size by its Type, Aircraft type, Platform, and Region.

By Type

Airframe HMV

·         Fuselage

·         Empennage

·         Wing

·         Others

Engine HMV

·         Turbojet

·         Turboprop

·         Turbofan

·         Auxiliary Power Unit

·         Others

Other Component HMV

·         Avionics

·         Mechanical

·         Others

By Platform

Commercial

Cargo

By Aircraft Type

Fixed Wing

·         Wide-body aircraft

·         Narrow-body aircraft

Narrow Body

By Regions

America

Europe

Asia Pacific

Middle East and Africa

Latin America

Key Players:

The aircraft heavy maintenance visits key market players are AAR (US), Air France KLM E&M (France), Airbus S.A.S (France), Barnes Aerospace (US), Delta TechOps (US), EGAT (Taiwan), Honeywell International (US), Lufthansa Technik AG (Germany), ST Aerospace (Singapore), SR Technics (Switzerland), and Turkish Technic, Inc. (Turkey).

Regional Analysis:

The North American region headed the aircraft heavy maintenance visits market industry, while the other regions had moderate shares, in 2017. Due to the increasing passenger demand in Asia Pacific, the aircraft traffic in the region is expected to grow exponentially, in the next few years. It is also expected that Asia will operate nearly 40% of the total global aircraft fleet by the end of the forecast period. As a result, it is expected that the Asia Pacific region would witness the fastest growth, during the forecast period.

Related reports:

Cognitive Robotics Market, By Learning Type (Motor Babble, Imitation, Knowledge Acquisition) and By Application (Aerospace & Defense, Automotive, Consumer Electronics, Healthcare and Commercial) – Forecast 2030

Motion Control Market: Information By Component (Actuators & Mechanical Systems, Motion Controllers, Electric Drives, AC Motors, Sensors & Feedback Devices, and Others), Technology (Pneumatic, Hydraulic, and Electromechanical Actuation), Application (Inspection, Material Handling, Packaging, Robotics, and Others), Industry (Metals & Machinery Manufacturing, Healthcare, Automotive, Aerospace & Defense, Oil & Gas, Semiconductor & Electronics, and Others), and Region (North America, Europe, Asia-Pacific, Middle East & Africa- 2030

About Market Research Future:

Market Research Future (MRFR) is a global market research company that prides itself on its services, offering comprehensive and accurate analysis with respect to various markets and consumers worldwide. Market Research Future has the distinguished goal of providing customers with optimal quality research and granular research. Our market research by products, services, technologies, applications, end users, and market players for global, regional, and national market segments, allows our customers to see more, learn more, and do more, helping to answer your most important questions

Contact:

Market Research Future (part of Wantstats Research and Media Private Limited),

99 Hudson Street, 5Th Floor, New York, New York 10013,

United States of America

+1 646 845 9312

Email: sales@marketresearchfuture.com